TS. Assigning joins based on segment names in Haul Infinity

Joins assigned based on segment names is setup in Haul Infinity and is used by Tactical Scheduler to ensure trucks use specific routes.

It negates the possibility of trucks flying through the air/through walls to use ramps in other stages to exit a bench.

Assigning joins based on segment names reduces the number of ramps available out of a pit. This increases scheduling speed and keeps trucks on the right ramps for that work area.

The selected block connects to three different ramps

To assign the segments:

Locate a pit or block with incorrect ramp connections.
Copy the ramp address (ie. OpenPit\Mine1\Pit2\Stage1) to clipboard.
Locate the ramp that should be used to exit the stage. If the ramp does not exist, draw it.
Select the ramp.
In the Properties panel, paste the block address into the ramp name.
Select Extensions > Assign Joins Based On Segments Names.
Repeat the procedure from Step 1 until no blocks remain.

Note that assigning joins using segment names only limits the connection point to the network, it does not affect the path through the network.

The selected block only connects to the ramp that shares its name

Joins assigned based on segment names persists between planning cycles, even if you change the scheduling blocks, because the segment properties have not changed. This makes it preferable to manual joins, since manual joins are flushed whenever the blocks are re-imported.

How to video: